So Many People Make These 10 Mold Removal Mistakes
Whether it’s after a rain storm or just water leakage in your house, one unwelcomed guest you will find is that black and yucky mold, aside from the crawling insects. If you spot mold, you should consider mold removal as soon as possible. However, if you’re removing mold yourself, beware of these mistakes.
Mold Cleaning Mistakes To Avoid
Painting Over Mold
If your first thought was to paint all over the mold when you see it, then stop that train of thought right there, because it won’t do you any good. Painting over mold won’t only make it reappear in the worst way possible, but it will also cause more issues in the long run. You might have seen a lot of paints that say “mold-resistant” and things like that, but do they work?
Well, they only work when you apply the paint on the wall with zero mold. It is mold-resistant, not mold-killing, so keep that in mind. When you want to paint your walls infested with mold, the first thing to do is to clean them nicely. Remove every speck of mold, and let it dry before you even put a lick of paint on the wall. This will give you the best results.
Not Facing The Real Issue
Mold is a huge problem, that’s for sure, but what can be daunting is the issue that causes mold in the first place. If you want to get rid of mold, then instead of just attacking the mold with chemicals, you need to get rid of the issue as well. What is the issue, you ask? That is water leakage and moisture.
Mold is caused because of these things, 90% of the time, so you want to target these areas as well. This is going to ensure that your house stays mold-free for longer.
Bleach Doesn’t Always Work
You might have heard of this hack a lot. Use bleach on mold and it will get rid of it instantly. Well, that might not be true at all times. Sometimes, bleach does kill mold, but that doesn’t mean that it will always work. Sometimes, it won’t do anything and you’ll end up doing more bad than good when using bleach.
This is why instead of using chlorine bleach, it’s better to use chlorine dioxide. This is a more stable chemical and it gets the job done perfectly. You’ll get rid of mold in this way and it prevents it in the future too, so that’s great news.
Leaving Mold Unnoticed
This can also be a huge mistake. You might think that mold won’t go anywhere and even if you see it, you’re too busy or lazy to clean it and get rid of it. Well, this can cost you a lot, especially if the mold is dangerous and it spreads like wildfire all over the house.
This is why whenever you see mold on any surface, it’s important that you clean it up right away by following the basic mold cleanup steps. This will ensure that your house is healthy and safe and you’re not risking your or anyone else’s life for that matter.
Not Every Mold Is Visible
You think that mold is just white, green, or black. Well, it’s not always the case. Sometimes, mold can be invisible to the naked eye, because it is in the developing stages. The spores are tiny so you can’t possibly see them and the mold you see on the walls and other crevices of the house are widespread infestations that have gone too far.
So, you want to rely on your other senses and signs to identify mold. Sweet smells, damp places, and closed areas of the house – these are the places where you can bet your money that mold will thrive and grow.
Not Scrubbing
Sometimes, you think that a good ole wipe is enough to remove mold and you can even see it at times. When you run a wet washcloth over the mold, it disappears. Well, that won’t be the case every single time.
Even if you see the mold getting wiped away, there might be spores embedded in the surface. This is why you always want to use a scrubbing brush to get rid of mold. This is going to remove everything and mold won’t reoccur.
Restoring Mold Infested Things
When you come across mold-infested things, the best thing to do in this case is to get rid of them. There still might be dormant spores in these things that can thrive when they’re in the right environment.
A lot of the time, people can restore the items that were once infested with mold. This can be possible sometimes, but not every time, especially if the mold was embedded too deep in the article. This is why you always want to be careful when restoring things that come into contact with mold because they can likely cause another widespread infestation in no time.
Spreading Mold While Cleaning
There are a lot of things that you can mindlessly do when cleaning, that can make the mold spread. For instance, you’re using the same cloth you used to clean the mold to do other things, even though it is washed and dried. You might assume that it is clean, but is it? You can’t be too sure.
This is why you want to always discard the things you use when you’re cleaning mold. Also, protecting the rest of the house when you’re elbows-deep in mold cleaning and removal is important. It’s going to stop mold from spreading everywhere.
Not Being Careful
If you’re cleaning or removing mold by yourself, then you need to be prepared and that means you need to have your protective gear in hand. This includes protective and thick gloves, maybe a mask, and goggles to protect your eyes.
This might sound like a lot of work for simple mold removal but mold is a pesky fella and it can cause harsh and very serious skin reactions if it comes in contact with your hands. As for the eyes and nose, let’s just say you don’t want to breathe this stuff in because it will make you go into a wheezing fit.
Ignoring Cleanup After Mold Removal
If you’re already going through the trouble of getting rid of mold, you might as well get the job done correctly. You want to clean up after the mold removal. Yes, this is double work, but you will save yourself from a lot of problems in the future.
Get rid of all of the things you used to clean the molds, like rags and cloths, and also clean the surrounding space well. Doing this will prevent future mold infestation.
Conclusion
If you’re removing mold, you might as well know what many people get wrong so that you do things right. The last thing you want to do is make things worse and make the mold come back 10 times stronger and more stubborn than ever. Keep in mind that DIY mold cleaning may sound like you’re saving money, but it can cost you more in the future. So, always hire mold remediation Silver Spring services who can remove mold for you safely and properly.
